The Moxtek Proflux UVD260 and UVD240 analyzers provide superior broadband performance in spectroscopy applications ranging from 240nm in the Deep UV up to 3.3μm in the mid-wavelength infrared. Moxtek Proflux designs utilize wafer-scale aluminum Nanowire fabrication technology to produce the finest-pitch commercial wire-grid polarizers on the market. These deeply sub-wavelength optics offer the benefits of conserved space, an exceptionally wide field acceptance angle, minimal performance variation with wavelength, and none of the dramatic short-wavelength infrared disturbances present in Glan-Taylor and Glan-Thompson polarizers. View document

The Moxtek® wire-grid polarizer technology offers a reliable, highly durable solution to high quality LCoS display technology with a perfect polarization match to the LC imager. Recent improvements in the polarizing beam splitter (PBS) technology enable a 10% improvement in efficiency. Introduction This technical brief compares imaging needs and how Moxtek is improving its products. […] Read more

Energy Dispersive Spectroscopy (EDS) instrument manufacturers and research labs are continually pressing for x-ray components that enable higher performance at a lower cost. High performing x-ray detectors are critical to building quality instruments. Moxtek® has improved the sensitivity of our Si-PIN detectors by using thicker diodes and thinner beryllium windows. The increased performance enables faster […] Read more

DuraBeryllium Plus windows demonstrated the greatest resistance to a variety of corrosive elements. This resistance was seen even after the parts had been baked at temperatures up to 400°C. Read more

Moxtek® is a leading manufacturer of X-ray windows for low energy X-ray detection. Moxtek manufactures ultra-thin polymer X-ray windows that are attached to metal mounts which house energy dispersive X-ray detectors such as Silicon Drift Detectors (SDDs). These windows allow for transmission of low energy X-rays while maintaining a hermetic seal critical for the X-ray […] Read more

Moxtek® X-ray Windows are very thin and fragile, great care should be taken while handling these windows. The guidelines below must be strictly followed in order to prevent damage to the window. View document

AP3 ultra-thin polymer windows manufactured at Moxtek® receive two quality inspections before being shipped to customers, once before installation into various mounts View document

This preliminary setup will lead to a prototype simultaneous XRD/XRF instrument. View document

Moxtek® delivers each AP window in a mount appropriate for each customer. The windows are bonded to a mount using vacuum compatible adhesive. This Technical Note provides general guidelines to use when designing mounts for Moxtek AP windows. View document

A first prototype XRD/XRF instrument was developed at NASA Ames Research Center and is currently in use at Los Alamos National Laboratory. The intended applications for this instrument are for planetary exploration and as a portable instrument for terrestrial use. View document