Consult Our Experts

Request A Quote

Request A Quote

Consult Our Experts

  • This field is for validation purposes and should be left unchanged.

X-Ray Windows

  • Do you have standard mounted beryllium windows?
    Yes, we have standard mounted beryllium windows available in conflat flanges.
    Design Guidelines for DuraBeryllium window mount
  • What sizes of AP windows are available?
    Our standard sizes are 10mm2, 30mm2, 50mm2, 80mm2, and 140mm2. We can also talk to you about custom sizes and geometry.

    Consult a Moxtek expert >
  • What’s the difference between your DuraBeryllium and AP windows?
    In most cases, you would use our DuraBeryllium windows to detect elements as light as sodium and our AP windows for elements as light as beryllium (Be).

    Visit our AP window page >
    Visit our DuraBeryllium window page >
  • What does DuraCoat do?
    DuraCoat is our patented corrosion prevention coating that increases the life of your window, especially if it’s exposed to humidity or other corrosive materials. For minimal transmission loss, we make DuraCoat with elements lighter than oxygen.

    Visit our DuraBeryllium product page >
  • What is DuraCoat Plus?
    DuraCoat Plus is a polymer film added on top of our standard DuraCoat that adds additional corrosion prevention and leak integrity.
  • Does DuraCoat Plus have DuraCoat as well?
    Yes
  • Where is DuraCoat applied?
    Generally, you would apply DuraCoat to any exposed surface using a proprietary deposition process.
  • Can I epoxy directly to DuraCoat?
    Yes you can.
  • Where can I find transmission curves for your windows?
    On each of our X-ray windows product pages, we've included a downloadable datasheet with that information.
  • How do you measure the leak rate of your windows?
    On each of our X-ray windows product pages, we've included a downloadable datasheet with that information.
  • How do I design a window mount?
  • What are the health hazards associated with beryllium?
    Under normal conditions and intended use, our X-ray windows have no exposure limits, nor do they represent an inhalation, ingestion or contact hazard.

    Please reference our Material Safety Datasheet (MSDS) for conditions that could cause harmful exposure to beryllium.

    See Material Safety Datasheet >
  • Can I buy bare beryllium from Moxtek?
    We are capable of providing bare beryllium. However, for your window’s protection, we strongly recommend using DuraCoat.

X-Ray Detectors

  • Do you sell a Silicon Drift Detector?
    At this time, we only sell PIN detectors.

X-Ray Sources

  • Does Moxtek manufacture tubes with voltages higher than 40kV?
    Yes. We offer our 50kV MAGNUM X-ray tube.
  • Can I use your sources for imaging?
    Yes, and we've even got an X-ray Sources web page with more information.

    Visit our X-ray Sources page >
  • What target materials are offered on your source?
    Each X-ray source web page contains a downloadable datasheet with that information.

    Visit our X-ray Sources page >
  • Why would you need different targets—like tungsten and rhodium—on an X-ray source?
    For XRF, tungsten is often used for metal identification RoHs/WHEE. Likewise, Rhodium or silver is typically used for light element analysis, detection of aluminum, magnesium, sulfur, etc.

    Consult a Moxtek expert >
  • What are your X-ray spot sizes?
    Our MAGNUM source spot-sizes from 500 microns to 800 microns.

    Consult a Moxtek expert >
  • What are the dimensions of your available sources?
    For monoblocks:
    We have a 4W (max), 50kV (max) monoblock source that is as small as 6” (150mm) long by 1” (25.4mm) wide by 2” (51mm) tall.
    We have a 12W (max), 60kV (max) monoblock source that is as large as 6.5” (165mm) long by 1.35” (35mm) wide by 2.75” (70mm) tall.

    For cabled power supplies, the power supply boxes range as follows: We have a 4W (max), 40kV (max) power supply that is as small as 5” (128mm) long by 0.8” (21mm) wide by 2” (51mm) tall, cables running between 4” (102mm) and 11.5” (292mm).
    We have a 10W (max), 50kV (max) power supply that is as small as 5.7” (145mm) long by 0.9” (23mm) wide by 2.25” (57mm) tall, cables running between 4” (102mm) and 11.5” (292mm).

    The tube shields range greatly, typically between 1.125” (29mm) and 1.25” (32mm) in diameter, 2.18” (55mm) to 2.5” (64mm) long.

    Specific dimensions are available on our datasheets.
  • Does Moxtek offer the power supply for x-ray tubes?
    Yes. All Moxtek X-ray sources include the power supply.
  • What power supply controller do you recommend for Moxtek tubes?
    We recommend our FTC-200 X-ray Tube Controller. For more information, we’ve posted a lot about this product on its detailed web page.

    Visit our FTC-200 Tube Controller page >
  • Are Optional Ribbon Cable (ASM00362) and Optional 2-PIN Secondary Cable (ASM00364) delivered with the product?
    The Optional Ribbon Cable is included with each of our FTC tube controllers. Our 2-PIN Secondary Cable is included with our standard 50kV cabled units. At the customer’s request, we will deliver the Optional Ribbon Cable and or Optional 2-pin Secondary Cable separately.
  • How much radiation do your X-ray sources produce?
    At 40kV, our tungsten sources give off approximately 3.0x1011 photons/second/steradian/100µA. Our silver sources (also at 40kV) give off approximately 1.5x1011 photons/second/steradian/100µA.

General

  • What is the warranty on your products?
    Each product web page contains detailed warranty information.

    Visit X-ray products warranty >
    Visit Optics products warranty >
  • Does Moxtek offer encapsulation services?
    Yes. We specialize in encapsulation services, please contact us for more details.
  • What information is needed to send a quote?
    On the right-hand side of each product web page is a "Request a Quote" button. Clicking it presents a form with the required details (e.g. contact information, etc.) we need to create a quote. In the comments field of that form, you can include a brief description and the required dates and specifications of your request. Once we receive your information, we’ll respond promptly.

    Consult a Moxtek expert >
  • Can you customize your products based on our needs?
    Yes. That’s a core element to our service. We excel at meeting customer-specific requirements.
  • How long does it take to process the order?
    The lead time is typically 2-6 weeks. Custom order lead time is determined on an individual basis.
  • Do you have distributors outside the US?
  • How can I find out the price of a specific component?
    You can request a quote from any one of our product pages.

    Consult a Moxtek expert >
  • I’d like to order between 20 and 100 Moxtek samples. What does the lead time look like?
    Lead times vary depending on the samples you’re interested in. You can request a quote from any one of our product pages.

    Consult a Moxtek Expert >
  • What's the lead-time of MP pieces?
    Lead times vary depending on the pieces you’re interested in. You can request a quote from any one of our product pages.

    Consult a Moxtek Expert >
  • What is Moxtek's positions on the ʺConflict Mineral" issue?
    Never do we knowingly purchase conflict minerals. We purchase the following minerals from conflict free smelters: tin, tantalum, tungsten, and gold. We require our suppliers to purchase these metals from conflict free smelters, as well.

Validations

  • Microscopy and Microanalysis member

  • SPIE member

  • American Vacuum Society member

  • ICDD member

  • IEEE Society member

  • High Vacuum and Thin Films

  • ISO 9001

  • Institutional Member of EXSA (x-ray)