Learn more about the specifications of the MOX140G, by looking over the detailed MOX140G Cone Beam drawing. Moxtek manufactures low-power miniature X-ray sources for a variety of applications including handheld XRF, Security and NDT and benchtop instruments. Moxtek sources are small, lightweight and can be packaged into customer enclosures. MOX140G is ideally configured for backscatter and traditional imaging. MOX140G is capable of running at 140kV (max). The MOX140G Cone Beam drawing will help you determine if this is the right fit for your application.

High energy imaging in a compact package. MOX140G is a complete X-ray source that is ideally configured at:

High energy imaging applications (140kV) compact (3.5in x 3.5in x 5in) lite weight 1.55kg (3.4 lb) package.

Side window tubes have approximately 30% higher x-ray flux compared to end window tubes, which helps in applications that rely on counting low numbers of photons, such as X-Ray Diffraction (XRD).

• Caution: Initial cold warm up requires a 3 second ramp to full output. • Operating Temperature: Moxtek recommends a warm up period of 10 minutes before running below 0°C. • Radiation Leakage: Moxtek takes every precaution with radiation leakage but it is up to the end user to make sure there is adequate protection for your needs. Consult with an application engineer for your specific application. Learn more about the MOX140G by clicking this link for the datasheet.